An above-ground pool can be a fantastic addition to your backyard this summer, and swimming can lead to instant relaxation excitement, and physical fitness. However, you must know before you decide to buy that daily maintenance is an absolutely critical part of owning an above-ground pool. Pools, no matter the size, shape, or design, are easily susceptible to infection from outside sources. In order to preserve your pool’s cleanliness, you will need to add chemicals (such as chlorine or bromine) to the pool water and install a water filtration system to circulate the chemicals throughout the pool’s water supply. A potential pool owner may have some concerns about adding chemicals to the pool water for various reasons: a fear of skin irritation, limited knowledge as to how the chemicals work, etc. Even with these concerns, however, the fact remains: using pool chemicals and a filter will assuredly keep your water safe.
During summer months, the water in your pool is constantly exposed to foreign particles and contaminants from other swimmers or from nature. Adding chlorine granules or bromine tablets to the water supply will strengthen the water’s resistance to outside contamination. Without chemicals like chlorine or bromine in the pool water, outside bacteria will contaminate the pool water. Harmful particles such as algae will begin to form on the surface of the pool water: swimming in a pool with algae will lead to sickness. Chlorine and bromine fight bacteria present in pool water by affixing themselves to the bacteria particles, killing the harmful particles and making them easily vacuumed away. Note to concerned swimmers: if you are worried about skin irritation, bromine is far less acidic than chlorine, and, in effect, is safer on the eyes and skin.
You will also need a pool water filter system present in your above-ground pool to compliment the chlorine/bromine chemical. Without a filter system, the traces of chlorine you added to the pool will become stagnant. Unfiltered, still water is still easily susceptible to outside contaminats, even if you have added chemicals to the pool water. A pool filter will suck up and dispose of both visible debris, such as algae and microscopic bacteria. The chemicals must also be circulated in the pool water to avoid clumping in one area of the pool (adding all the granules to one section of the pool and neglecting other areas). Make sure to run the filtration system at least 10 hours per day to keep the pool water safe for swimmers of all ages.
Even though above full description, you might still wondering about Pool Chemicals regarding to safety and price.
The groundpools.net has huge discounted affordable price for many different type of chemicals with automatic Pool Chemical feeder which will remove your concern about how much pool chemical should be added into your above ground or in ground pool. Again, the pool chemicals are most important part of your above ground pool or in ground pool with water filter to maintain health and clean water to protect your family or swimmers.
The first moment you are thinking about the pool chemical, then you have to follow the below steps before thinking about anything.
BEFORE THE POOL CHEMICALS
Circulation & Filtration
The pump and filter form the heart of any pool maintenance program. Without a strong, efficient pump and filter, keeping your pool water clear will be much more difficult and expensive. The best time to run your pump is during the day for at least 10 hours.
Your filter removes both visible debris and microscopic particles. It should be backwashed when the filter’s pressure gauge indicates levels 8 to 10 lbs. above normal (always follow manufacturer instructions).
It is also important that your pool water circulates around the perimeter of your pool. Water in motion makes it harder for bacteria and algae to take hold. More debris is also directed to your skimmers where it can be captured by your filter. Adjust the eyeball jets in your inlets to move your pool water in a circular motion.
All swimming pools have areas that have little or no circulation. These areas of minimal circulation are the breeding grounds for problems like algae growth. The walls and floor should be brushed and vacuumed once a week. Even if you use an automatic pool cleaner, brushing once a week is a must.
But you are still wondering how much chlorine or bromine) to the pool water will be safe enough. In order to make perfect condition, you have to have right pool water test set first and should know the safe points.
It is very important to test your water regularly for two (2) key factors: pH (bring pH level to 7.2 – 7.6 ppm) and Sanitizers(to bring free chlorine level to ideal range of 1 – 3 ppm).
By testing your water at least three times per week you will begin to understand how bather load, weather (rain and sun) and chemical application affect your pool’s water. By regularly testing pH and sanitizer levels, you will ensure crystal clear water all season long.